MB&F HM10 Bulldog 45mm
Reference not provided
How it wears
Wears true to its 45 mm case size
MB&F HM10 Bulldog 45mm measures 54 mm lug-to-lug on a 45 mm case, a lug-to-lug ratio of 1.20 against a database median of 1.18. That span is longer than 98% of the 8,093 watches in this database and longer than 75% of the 32 MB&F watches listed.
A flat wrist width of 60 mm (2.36 in) or more keeps it in the balanced range, and from 72 mm (2.83 in) it starts to look compact. Below 54 mm (2.13 in) the lugs are likely to overhang the wrist. Flat wrist width is measured straight across the top of the wrist, not around it.
At 24 mm thick it is on the thicker side, thicker than 100% of the watches with a listed thickness.
Wrist fit analyzer
Fit reference
Uses nearly the full wrist width; trying the watch on is strongly recommended.
Sources
- https://www.hodinkee.com/articles/the-horological-machine-hm10-bulldog-from-mbandf-introducing
Hodinkee reports 54mm lug-to-lug, 45mm case size/width, 24mm thickness for MB&F HM10 Bulldog in “Introducing: The Horological Machine HM10 'Bulldog' From MB&F.” The article's planar case length/top-to-bottom dimension is stored as the lug-to-lug equivalent.
- https://www.hodinkee.com/articles/mbandf-hm10-bulldog-hands-on
Hodinkee reports 54mm lug-to-lug, 45mm case size/width, 24mm thickness for MB&F HM10 Bulldog in “Hands-On: The MB&F HM10 Bulldog.” The article's planar case length/top-to-bottom dimension is stored as the lug-to-lug equivalent.
Found wrong data?
Send a correction report for operator review.